Well the weather finally cooperated with my schedule and I got in my first flight of the new year yesterday. It was a beautiful day to fly. It was high hazy overcast to broken, providing some beautifu

Can someone give me a lead on where to look for either, a Brand name or else as I'm looking to replace the plates and cone for an Ed Sterba wood prop sitting on a C-85... Thx in advance Michel

Nosewheel Man (A Parody of 'Nowhere Man' by the Beatles) youtu.be Given my recent intrepid foray into giving tail dragger Q advice, despite my being a nose dragger Q pilot, I thought I could eat a lit

Bruce Crain https://www.facebook.com/100004918742569/posts/pfbid02TqKjQxhqqsvD9sRF1VHgaAcTsLKE53ZEdkotskw6r1qc62CCb3BAcnFfv4DvFM8Pl/?

Sorry guys! I forgot to write in the body of the message! Here is the video again! Bruce Crain https://www.facebook.com/100004918742569/posts/pfbid02TqKjQxhqqsvD9sRF1VHgaAcTsLKE53ZEdkotskw6r1qc62CCb3B

This could be a real deal for someone. I found this on Craigslist in Redding, California. https://redding.craigslist.org/avo/7571131317.html

Happy New Year Everyone! I got off LVK this morning at 8:37A with a direct 32k headwind all the way home to Auburn. Made a couple hot laps around my place to let Mama know I was home. She was on the b

Happy New Year everyone. I just got back from a half hour flight. I took my father in-law along for a beautiful flight in southern Florida. Kevin (Q200, dragger)

Honey Lamb and I flew the TriQ 200 today and I gave 3 rides! They were beautiful flights and 59 degrees with the wind coming straight down the runways! One of the passengers was over 200 lbs! It was h

When I started finishing my Q-200, back in 1985 or so, I was hangered with a QAC dealer. For the finishing phase of his project, Marvin had used a polyester resin, which he mixed with micro-balloons i

I bought a Q200 from Bob Farnahm in April of 21. He graciously offered to help me with my first condition inspection , specifically taking off the elevators and lube them up and re - install. I flew b

This came across the transom on the Carnard Forum, and I thought it was worth posting to the Q-list as well. Probably good information from an informed source for all of you who are new builders or ar

Hi, Sorry to bother you, Do you order on amazon? Thanks Keith Welsh

From: "Norman Coote" <normancoote5@ Sent: Tuesday, December 20, 2022 1:25:44 PM Subject: Belly board My belly board install using linear actuator plus installing taxi lite in board. Not flown yet so c

Hi guys, I'm thinking ahead a bit, I'm installing my tail wheel and probably will look at installing the belly board next. All I have is the grainy belly board drawings that I've downloaded. I seem to

Got out on Saturday for a short flight around our valley. It was -8 C when I took off, so the density altitude was well below field MSL. Climbed out spritely and the thick air felt great. Also, have m

My tailspring broke where the old tailwheel was attached, so missing about 2 inches for my new tailwheel plus the ID of the attachment is 5/8" when the remaining spring is not quite 3/4". See picture

Following are photos that show a 2-winged instrument panel that allows access behind the panel, forward to the firewall while standing outside of the cockpit. The center frame is constructed with alum

Elevator trim control The photos show my spring and roller chain with wheel and friction adjustment screw. To: "Norman Coote" <coote@...>