Happy New Year everyone. I just got back from a half hour flight. I took my father in-law along for a beautiful flight in southern Florida. Kevin (Q200, dragger)

Honey Lamb and I flew the TriQ 200 today and I gave 3 rides! They were beautiful flights and 59 degrees with the wind coming straight down the runways! One of the passengers was over 200 lbs! It was h

When I started finishing my Q-200, back in 1985 or so, I was hangered with a QAC dealer. For the finishing phase of his project, Marvin had used a polyester resin, which he mixed with micro-balloons i

I bought a Q200 from Bob Farnahm in April of 21. He graciously offered to help me with my first condition inspection , specifically taking off the elevators and lube them up and re - install. I flew b

This came across the transom on the Carnard Forum, and I thought it was worth posting to the Q-list as well. Probably good information from an informed source for all of you who are new builders or ar

Hi, Sorry to bother you, Do you order on amazon? Thanks Keith Welsh

From: "Norman Coote" <normancoote5@ Sent: Tuesday, December 20, 2022 1:25:44 PM Subject: Belly board My belly board install using linear actuator plus installing taxi lite in board. Not flown yet so c

Hi guys, I'm thinking ahead a bit, I'm installing my tail wheel and probably will look at installing the belly board next. All I have is the grainy belly board drawings that I've downloaded. I seem to

Got out on Saturday for a short flight around our valley. It was -8 C when I took off, so the density altitude was well below field MSL. Climbed out spritely and the thick air felt great. Also, have m

My tailspring broke where the old tailwheel was attached, so missing about 2 inches for my new tailwheel plus the ID of the attachment is 5/8" when the remaining spring is not quite 3/4". See picture

Following are photos that show a 2-winged instrument panel that allows access behind the panel, forward to the firewall while standing outside of the cockpit. The center frame is constructed with alum

Elevator trim control The photos show my spring and roller chain with wheel and friction adjustment screw. To: "Norman Coote" <coote@...>

How have you attached the elevator trim wheel spring to CSA8? I'm thinking of drilling 2 holes in CSA8 and either just feeding the spring tang through them or installing a shackle for each spring Plan

The dual throttle and mixture setup is shown with the two friction locks. One tube inside the other transfers control to co-pilot side. A very simple setup. The seat belts obtained on eBay for under $

My Q2, Corvair powered with white paint recently applied now awaiting the stripes to be applied. Project nearly ready to transport to the airport for testing and hopefully flying. What I thought would

Good morning all, I recently installed two Uavonix AV30’s in my plane and removed all the vacuum stuff. That all worked great and I really like not having vacuum. Each unit is a full blown AHARS. Havi

Hi, Sorry to bother you, Did you shop on Amazon? Thanks

Best source for O-200 flange and prop bolts? Links to exact parts appreciated. Thanks Robert -- Robert "TheFrisco" Schmid (408) 805-5450 www.facebook.com/TheFlyingFriscos www.theflyingfriscos.com Love

In the mid 90’s, back when our internet connection was still pick up the phone, dial the number, put the phone on the modem type internet, I came across the Q1. I thought it was absolutely amazing! In