Hi “Q Bees”! Say Mike Shuck sent this note to me with questions on main wing and canard. I am forwarding this to all of you to see if we can get him the correct info. He has agreed to do a seminar on

Good mornin' Field of Dreams aficionados! We are a go for "Field Of Dreams 2020"! Hopefully the Covid doesn't come back and we will forge ahead! You can find the rsvp to respond and give Imraan, Rache

Most of my flying at high-density altitudes has been in a turbo. When not in a turbo, I have been in a typical tricycle gear plane where I could do a full-power runup and lean for max power prior to t

Does anyone have a interest in some NOS Q2 parts? in CA. all 4 fuselage parts ,seat and bulkheads, cowling.canopy glass. about a grand for all 831 334 thirty 30five stan

Hope everyone is having a great “end of Summer”!! We are still on for “Field Of Dreams” September 18-20! We are always glad to accommodate anyone arriving early and leaving late so contact us at any p

Hi All, My plane is very happy to have bugs removed this morning, and to be looking out on familiar territory. I told some folks at the Summer-Fling about the peaceful view from my hangar, so I though

I ran into Dave McConahy from Okmulgee, OK while visiting a fly in at Cushing, OK! 500 hours on a VW Q2 with LS1 canard. Hopefully he will come to Field Of Dreams in September! Still a sweet looking Q

Any different ideas for the elevator mass balance position for the Q200? I have the ailerons and elevators mounted and am now installing the inner phenolic bearings. having fun----------- Chris -- Thi

The following photos have been uploaded to the Views from Your Hangar album of the main@Q-List.groups.io group. 20200816_125728.jpg By: Sam Hoskins

I am starting to mock up the elevators on the Q200. I can't seem to find any info on the clearance between the elevator and the elevator slots. Does using the aluminum hinge fittings for reference wit

Hi again, I have a video file I'm needing to upload to the Google Drive. The file is on my iPhone 8, I have the Google Drive app loaded but it does not seem to transfer. I tried plugging the phone int

I just finished the top skin layup on the wing and am doing the canard top on Wednesday. Does anyone remember their weight for wing and canard Q200 at this stage? Curious as to where I stand. Also, in

Sounds to me like you are trying to fix something that isn't broken. The plans mounting of the ailerons works fine. I have to take the tailcone off to remove the ailerons, but I have to do that at ann

Hello, I ran across this photo planted back in my files. Does anyone know what became of this Q2? Just curious Thanx

Richard, You had asked about the reflexor and elevator push pull tubes and adjustment for roll trim. I will attempt to attach some pics for you. Reflexor installed. The aluminum holds the cookie in th

All, I was able to get Dave's presentation uploaded, but when he saw it, he realized that the recording quality was so poor, that no one would probably want to sit through it. This may be an on-going

Hi Richard, Most people use the original 4" rim and tire size that came with the tri-gear kit (also most people have the heavier-duty Scott Swing/Velocity gear leg and fork). I initially used the 5" r

Topic: Q-Tour With Dave Dugas and his award winning Q-2 Time: Saturday Aug 8, 2020 09:00 AM Central Time (US and Canada), 1400 GMT Join Zoom Meeting https://us04web.zoom.us/j/76406463852?pwd=QmxwZ29wV

Hi Sam, Looking for currant Zoom Meeting Link ?? Can u Post/Repost hyper Link Plz Thx Graham . From: Sam Hoskins Sent: Friday, August 07, 2020 7:49 AM To: main@Q-List.groups.io Subject: [Q-List] Remin