|
Tri q 200 project for sale #Tri-Q $4000 2 messages
#Tri-Q
Trying to get my tri q project sold asap. Need the room in my hanger for work and my sonerai. It has everything already built . Missing cowl and nose gear. Ready to have canards installed and main gea
Trying to get my tri q project sold asap. Need the room in my hanger for work and my sonerai. It has everything already built . Missing cowl and nose gear. Ready to have canards installed and main gea
|
By
Steve S
·
|
|
Rutan Starship prototype demise photo 3 messages
Hi All, At the Spring Fling, I shared a short story over lunch with Nathan Peck concerning the violent demise of the Scaled Composites 80% scale Starship prototype. Just by coincidence, I just happene
Hi All, At the Spring Fling, I shared a short story over lunch with Nathan Peck concerning the violent demise of the Scaled Composites 80% scale Starship prototype. Just by coincidence, I just happene
|
By
Jay Scheevel
·
|
|
report 4 messages
Managed to put on 7.7 hrs on the Subaru Q this spring. I am finding it quite easy to land other than the faster speeds. Seems to three point most times. I hardly ever touch the reflexor other than for
Managed to put on 7.7 hrs on the Subaru Q this spring. I am finding it quite easy to land other than the faster speeds. Seems to three point most times. I hardly ever touch the reflexor other than for
|
By
Chris Walterson
·
|
|
Would this work for 0-200 ? Increases HP on race engines
An external vacuum pump evacuates excessive crankcase pressure, resulting in less-than-atmospheric pressure in the sump. This pressure is readable with a vacuum gauge. The size and speed of the evacua
An external vacuum pump evacuates excessive crankcase pressure, resulting in less-than-atmospheric pressure in the sump. This pressure is readable with a vacuum gauge. The size and speed of the evacua
|
By
allen relseg
·
|
|
I make Quickie metal parts 6 messages
I have all the plans to make the metal parts for the Quickie aircraft. Have done countless parts for people through the years . Message me if you need anything made. I have a quick turn around on ever
I have all the plans to make the metal parts for the Quickie aircraft. Have done countless parts for people through the years . Message me if you need anything made. I have a quick turn around on ever
|
By
Steve S
·
|
|
Tailwheel Attachment Part Machining? 9 messages
My tailspring broke where the old tailwheel was attached, so missing about 2 inches for my new tailwheel plus the ID of the attachment is 5/8" when the remaining spring is not quite 3/4". See picture
My tailspring broke where the old tailwheel was attached, so missing about 2 inches for my new tailwheel plus the ID of the attachment is 5/8" when the remaining spring is not quite 3/4". See picture
|
By
Robert Schmid
·
|
|
Promised link 3 messages
Hi All, I promised Jerry and Sam H that I would send a link to the details on how to find the LED strip/ribbon lighting that I had strung into my area forward of the cockpit and beneath my panel. I fi
Hi All, I promised Jerry and Sam H that I would send a link to the details on how to find the LED strip/ribbon lighting that I had strung into my area forward of the cockpit and beneath my panel. I fi
|
By
Jay Scheevel
·
|
|
Spring Fling Wrap up 5 messages
Hello again everyone: First I must extend a huge Thank You to all who made it to Spring Fling. It wouldn't have happened without you. THANK YOU!! Mother Nature cooperated quite nicely as you will see
Hello again everyone: First I must extend a huge Thank You to all who made it to Spring Fling. It wouldn't have happened without you. THANK YOU!! Mother Nature cooperated quite nicely as you will see
|
By
Keith Welsh
·
|
|
Spring Fling flight stats 3 messages
Hi All, Just added up the numbers for out and back to Keith’s spring fling. Going there, I flew 1152 statute miles in 7.27 hours of flight time (did it in one day). That is average of 158 mph groundsp
Hi All, Just added up the numbers for out and back to Keith’s spring fling. Going there, I flew 1152 statute miles in 7.27 hours of flight time (did it in one day). That is average of 158 mph groundsp
|
By
Jay Scheevel
·
|
|
Spring Fling 6
The last three emails are from pictures taken by Sam Hoskins. Naturally one name would be forgotten and that is motorhome Mark Gesler (I think I have that right) from Ohio who arrived on Friday. Betwe
The last three emails are from pictures taken by Sam Hoskins. Naturally one name would be forgotten and that is motorhome Mark Gesler (I think I have that right) from Ohio who arrived on Friday. Betwe
|
By
Keith Welsh
·
|
|
Spring Fling 5
By
Keith Welsh
·
|
|
Spring Fling 4
By
Keith Welsh
·
|
|
Spring Fling No. 3
More Photos. Also Sam sent a bunch of photos several of which I want to share....just as soon as I figure out how to. Sam, I'll be calling ya. Thanks again everyone for a great weekend. Keith
More Photos. Also Sam sent a bunch of photos several of which I want to share....just as soon as I figure out how to. Sam, I'll be calling ya. Thanks again everyone for a great weekend. Keith
|
By
Keith Welsh
·
|
|
Spring Fling No. 2
More Photos
By
Keith Welsh
·
|
|
Spring Fling '22 11 messages
Wow, what a fun time! Kevin and I made it back to Davenport. Kevin is still driving back to Luana. Weather was beautiful here when we landed, but we could see buildups to the north where Kevin is goin
Wow, what a fun time! Kevin and I made it back to Davenport. Kevin is still driving back to Luana. Weather was beautiful here when we landed, but we could see buildups to the north where Kevin is goin
|
By
Paul Fisher
·
|
|
Spring Fling 22 Day One 4 messages
Hello again everyone, What a great day. the weather has been beautiful and comfortable with highs in the upper 70's to low 80's. Fisher and Boddicker arrived in Fisher's RV7. Yep u heard right...the R
Hello again everyone, What a great day. the weather has been beautiful and comfortable with highs in the upper 70's to low 80's. Fisher and Boddicker arrived in Fisher's RV7. Yep u heard right...the R
|
By
Keith Welsh
·
|
|
Spring Fling 22 17 messages
Hello everyone, For those planning to attend Spring Fling 22 at the Terre Haute Regional Airport KHUF, June 3rd thru the 5th. WELCOME! I hope what follows is everything you will need to know. Be sure
Hello everyone, For those planning to attend Spring Fling 22 at the Terre Haute Regional Airport KHUF, June 3rd thru the 5th. WELCOME! I hope what follows is everything you will need to know. Be sure
|
By
Keith Welsh
·
|
|
Flight Report 11 messages
Yesterday was too good not to fly somewhere. I discovered a Mid-Georgia Canard-Wing fly-in going on at Perry, GA (KPXE). Doing my due diligence, I called to make sure the fly-in was still a go. They w
Yesterday was too good not to fly somewhere. I discovered a Mid-Georgia Canard-Wing fly-in going on at Perry, GA (KPXE). Doing my due diligence, I called to make sure the fly-in was still a go. They w
|
By
Jerry Marstall
·
|
|
Map 4 messages
Hi All, Sorry, this is not exactly Quickie related, but most will be interested. I have ordered a large VFR flight planning map as a photographic print from EdwardsPhotography.com . They make a print
Hi All, Sorry, this is not exactly Quickie related, but most will be interested. I have ordered a large VFR flight planning map as a photographic print from EdwardsPhotography.com . They make a print
|
By
Jay Scheevel
·
|
|
Hangar view 4 messages
Snow is gone. View from the hangar. yahoo---------------- Chris -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
Snow is gone. View from the hangar. yahoo---------------- Chris -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
|
By
Chris Walterson
·
|