Hey guys. I have a spot on the main wing of my Q2 where the fiberglass has delamed from the foam. Probably a spot about the diameter of a baseball. No apparent damage to the fiberglass and I can't fee

Hey all, I’m curious what’s out there for approximate sink rate at 90mph. I know there’s many factors/variables so let’s go with the setup below and add as necessary. I’ll need to go fly and try to ob

Short update on the Q200 with the Soob. My empty weight is 749. I have 13 hrs on it so far. Had to adjust brake pedals to get more positive braking. Easy fix. Replaced the fuel gauge with one that was

I just recently did a prelim W&B as I finish up my plane and then went deep down the rabbit hole immediately. I remade the original charts from the operating manual into a spreadsheet so I could figur

Anyone has any aileron counter weights and arms laying around? My Q2 didn't have any. Thanks Robert -- Robert "TheFrisco" Schmid (408) 805-5450 www.facebook.com/TheFlyingFriscos www.theflyingfriscos.c

Anyone running a turboed Remaster? Pros and cons?

I am making progress ... Removing all control surfaces Replacing the corroded tubes with new ones, cleaning the rest really well Designing in CAD and water jet cutting the reflexor parts Epoxing donut

I have the reflexor parts all cut and ready to be epoxied in per picture below ... But my problem is that it seems I need to put the reflexor donut much further down than most because otherwise the ai

I can't seem to find any reference in the instructions on what angle to fix the aileron rotator Q2CSA4 for differential aileron throw? See drawing below for the question ... I am asking because at a p

I have had several major life changes happen over the last year. I've had to make several adjustments to my life and schedule which had put my quickie on the back burner. But as things are balancing o

Since this conversation got going on a different topic thread I figured I ask my question in a new topic ... What's the ideal alignment? No camber, light toe out @ Gross Weight? I am asking because th

I am having an OnShape day 🙂 ... This is the bellcrank for the 6-pack mod This is a draft for the bellcrank in the 6 Pack. Need to print a test piece and then see, designed for a simple 3/8 x 5/8 x 5/

So I have been searching here and QHeads now for hours to find a reflexor drawings that give me dimensions for this type of setup, taken from Jay's build log ... The plan drawings have this quirky mec

Hi Steve, im looking for some one to make a couple of metal parts out of 1/8 inch aluminum can you please PM for the details? Thanks mike 200QK

Please remind me ... What paint did you use for the inside cockpit area? Heard to prime with exist primer first, but are they any other options? What about truck bed paints? Thanks Robert -- Robert "T

So after my own and reading about others hassle with wheel removal and install, I came up with this idea ... The basic idea is to instead of fiddling with the spacers inside the pants, widen the hole,

So many of you have been so helpful with all my questions and I thought I give an update here how I am putting all he good advice into practice. So here we go ... FIBERGLASS WORK I invited and paid Ja

Hello, I am reaching out as I near the end of my Q-2 build. The DAR will be coming out in a couple weeks to inspect the plane at my house, and then I will be trailering the plane to Livermore, CA (KLV

I am in the process of fitting the engine to the firewall, starter hole cut perfect, alternator needs a little box trimming but what about the oil screen box? How are you O-200 owners do oil changes?

I just met with Sean, a new Quickie builder, and he asked for any useful links and info I have so I compiled this "very incomplete" list. Knowing you all, I expect lots of other links to come from you